Cabinet button modes

Your Vext 2.0 has three modes you reach by holding the button on the front of the base. Each one uses a different hold time and turns the button a different colour.

Find the button on the front of the base. In normal operation it is green.

To exit any mode, give the button a quick push. When the light returns to green, you are out.

Hold the button for 3 to 6 seconds, until it turns purple, then let go.

Use service mode for maintenance or cleaning, when you do not want the cabinet to produce fog.

Hold the button for 6 to 9 seconds, until it turns blue, then let go.

Your cabinet is now ready to pair in the app.

Hold the button for 9 to 12 seconds. Factory reset clears your cabinet's settings, so it has its own article: Factory reset guide.

Nothing is deleted the moment you enter it. If you reach it by accident, press the button once and your settings are unchanged.

If the button does not reach the colour you expect, email support@vext.fi and tell us how long you held it and what colour you saw.